Endress+Hauser Liquiphant FTL64 - Page 53

Liquiphant FTL64 HART Accessories
Endress+Hauser 53
G 1 A
(1 NPT)
G 1½A
(1½ NPT)
!60 (2.36)
~72 (2.83)
~70 (2.76)
22 (0.87)
2 (0.08) 2 (0.08)
!60 (2.36)
18 (0.71)
50
50
5
5
A0037667
 32 High pressure sliding sleeves. Unit of measurement mm (in)
G 1, DIN ISO 228/I
• Material: 1.4435 (AISI 316L)
• Weight: 1.13 kg (2.49 lb)
• Order number: 52003663
• Order number: 52011880, approval: with inspection certificate EN 10204 - 3.1 material
G 1, DIN ISO 228/I
• Material: AlloyC22
• Weight: 1.13 kg (2.49 lb)
• Approval: with inspection certificate EN 10204 - 3.1 material
• Order number: 71118691
NPT 1, ASME B 1.20.1
• Material: 1.4435 (AISI 316L)
• Weight: 1.13 kg (2.49 lb)
• Order number: 52003667
• Order number: 52011881, approval: with inspection certificate EN 10204 - 3.1 material
NPT 1, ASME B 1.20.1
• Material: AlloyC22
• Weight: 1.13 kg (2.49 lb)
• Approval: with inspection certificate EN 10204 - 3.1 material
• Order number: 71118694
G 1½, DIN ISO 228/1
• Material: 1.4435 (AISI 316L)
• Weight: 1.32 kg (2.91 lb)
• Order number: 52003665
• Order number: 52011882, approval: with inspection certificate EN 10204 - 3.1 material
G 1½, DIN ISO 228/1
• Material: AlloyC22
• Weight: 1.32 kg (2.91 lb)
• Approval: with inspection certificate EN 10204 - 3.1 material
NPT 1½, ASME B 1.20.1
• Material: 1.4435 (AISI 316L)
• Weight: 1.32 kg (2.91 lb)
• Order number: 52003669
• Order number: 52011883, approval: with inspection certificate EN 10204 - 3.1 material
NPT 1½, ASME B 1.20.1
• Material: AlloyC22
• Weight: 1.32 kg (2.91 lb)
• Approval: with inspection certificate EN 10204 - 3.1 material
• Order number: 71118695