Endress+Hauser Micropilot FMR56 - Page 117

Micropilot FMR50/FMR51/FMR52/FMR53/FMR54/FMR56/FMR57 FOUNDATION Fieldbus The "Expert" menu
Endress+Hauser 117
Prerequisite Only visible for Switch output function = Limit.
Description Defines the variable to be checked for limit transgression and allocates it to the switch
output.
Options • Off
No measured variable is allocated.
• Level linearized
• Distance
• Terminal voltage
• Electronic temperature
• Relative echo amplitude
Factory setting Off
Switch-on value (0466)
Switch-off value (0464)
Navigation Expert → Output → Switch output → Switch-on value / Switch-off value
Prerequisite Only visible for Switch output function = Limit and Assign limit ≠ Off.
Description Define the switch-on point and switch-off point for the limit evaluation.
Range of values Depending on the selected measuring variable (Parameter Assign limit).
Factory setting Depending on the selected measuring variable (Parameter Assign limit).