Endress+Hauser Micropilot FMR56 - Page 19

Micropilot FMR50/FMR51/FMR52/FMR53/FMR54/FMR56/FMR57 FOUNDATION Fieldbus The "Expert" menu
Endress+Hauser 19
Display options • Operator
• Maintenance
• Service
Additional information • The access authorization can be changed via the Enter access code parameter
(→  19).
• If additional write protection is active, this restricts the current access authorization
even further. The write protection status can be viewed via the Locking status
parameter (→  18).
• If a -symbol appears in front of a parameter, the parameter cannot be changed via
the local display with the current access authorization.
Access status tooling (0005)
Navigation Expert → Access status tooling
Write access Read-only parameter
Prerequisite Only visible for operation via operating tool (e.g. FieldCare), not for operation via display
module.
Description Indicates access authorization to parameters via operating tool (e.g. FieldCare).
Display options • Operator
• Maintenance
• Service
Additional information If additional write protection is active, this restricts the current access authorization
even further. The write protection status can be viewed via the Locking status
parameter (→  18).
Enter access code (0092)
Navigation Expert → Enter access code
Write access Operator
Description Enter access code to disable write protection of parameters
Input range 0 to 9 999