Endress+Hauser Micropilot FMR56 - Page 32

The "Expert" menu Micropilot FMR50/FMR51/FMR52/FMR53/FMR54/FMR56/FMR57 FOUNDATION Fieldbus
32 Endress+Hauser
Options • Cancel
No action is executed and the user exits the parameter.
• Execute backup
A backup copy of the current device configuration in the HistoROM (built-in in the
device) is saved to the display module of the device. The backup copy comprises the
transmitter and sensor data of the device.
• Restore
The last backup copy of the device configuration is copied from the display module to the
HistoROM of the device. The backup copy comprises the transmitter and sensor data of
the device.
• Duplicate
The transmitter configuration is duplicated to another device using the transmitter
display module.
• Compare
The device configuration saved in the display module is compared to the current device
configuration of the HistoROM.
• Clear backup data
The backup copy of the device configuration is deleted from the display module of the
device.
Factory setting Cancel
Additional information Compare
The comprison result can be viewed in the Comparison result parameter (→  32).
HistoROM
A HistoROM is a non-volatile device memory in the form of an EEPROM.
While the respective action is in progress, the configuration cannot be edited via the
local display and a message on the processing status appears on the display.
Backup state (0121)
Navigation Expert → System → Conf. backup display → Backup state
Write access Read-only parameter
Prerequisite Only visible in the operating tool (not on the local display)
Description Displays the status of the data backup process.
Display options • None
• Store in progress
• Restore in progress
• Import in progress
• Delete in progress
• Compare in progress
Comparison result (0103)
Navigation Expert → System → Configuration backup display → Comparison result