Endress+Hauser Micropilot FMR56 - Page 25

Micropilot FMR56, FMR57 FOUNDATION Fieldbus Installation
Endress+Hauser 25
6.3.2 Horn antenna with mounting bracket (FMR56)
A0016865
 6 Installation of the horn antenna with mounting bracket
Align the antenna vertically to the product surface using the mounting bracket.
NOTICE
The mounting bracket has no conductive connection to the transmitter housing.
Danger of electrostatic charge
‣
Connect the mounting bracket to the local potential equalization system.
6.3.3 Horn antenna (FMR57)
Alignment
• Ideally, the horn antenna should be installed vertically. To avoid interference reflections or
for optimum alignment within the vessel, the Micropilot with optional alignment device can
be inclined by 15° in all directions .
• A marking at the boss enables alignment of the antenna. This marking must be aligned
towards the tank wall as well as possible.