Endress+Hauser Micropilot FMR56 - Page 26

Installation Micropilot FMR56, FMR57 FOUNDATION Fieldbus
26 Endress+Hauser
90°
90°
90°
90°
90°
A0019434
Depending on the device version the marking may be a circle or two short parallel lines.
Nozzle mounting
The horn antenna should protrude from the nozzle. If this is not possible for mechanical
reasons, larger nozzle heights can be accepted.
H
max
A0016825
 7 Nozzle height for the horn antenna (FMR57)