Endress+Hauser Profi Bus Levelflex M FMP40 Function Manual

1 Notes on use Levelflex M
10 Endress+Hauser
1.5.4 Operation with the VU331
Abb. 3: Selection and configuration in operation menu
X
X
X
X
S
SS
O
OO
FF
>3 s
F
...
2x
ENDRESS + HAUSER
E
+
–
...
...
Selection and configuration in Operation menu:
Group Selection
Function Group
unction
Note!
Selection menus:
function
Typing in numerals and text:
numeral / text
function
function
Group selection
Measured value display
1.) Change from Measured Value Display to by pressing
2.) Press or to select the required (e.g.. "basic setup (00)") and confirm by pressing
(e.g. "tank shape (002)") is selected.
The active selection is marked by a in front of the menu text.
3.) Activate Edit mode with or .
a) Select the required in selected (e.g. "tank shape (002)") with or .
b) confirms selection appears in front of the selected parameter
c) confirms the edited value system quits Edit mode
d) / (= ) interrupts selection system quits Edit mode
a) Press or to edit the first character of the (e.g. "empty calibr. (005)")
b) positions the cursor at the next character (a) until you have completed your input
c) if a symbol appears at the cursor, press to accept the value entered
system quits Edit mode
d) / (= ) interrupts the input,
4) Press to select the next (e.g. "medium property (003)")
5) Press / (= ) once return to previous (e.g. "tank shape (002)")
Press / (= ) twice return to
6) Press / (= ) to return to
F
SO
O
SO
F
S
X
S
F
S
F
F
OS X
OS
F
OX
F
OS X
OS
OX
➜✔
➜
➜
➜
➜
➜
➜
First f
continue with
system quits Edit mode
➜
✔
Parameter
Return to
Group Selection
basic setup
safety settings
linearisation
extended calibr.
tank shape
Standard
aluminium tank
plastic tank
bypass / pipe
coax probe
concrete wall
medium property

Endress+Hauser Profi Bus Levelflex M FMP40 Specifications

General

Brand	Endress+Hauser
Model	Profi Bus Levelflex M FMP40
Category	Measuring Instruments
Language	English