Endress+Hauser Proline Promag 10 Brief Operating Instructions

Products Solutions Services
KA00032D/06/EN/18.16
71321446
Brief Operating Instructions
Proline Promag 10
Electromagnetic flowmeter
These Brief Operating Instructions are not intended to replace
the Operating Instructions provided in the scope of supply.
Detailed information is provided in the Operating Instructions
and the additional documentation on the CD-ROM supplied.
The complete device documentation consists of:
• These Brief Operating Instructions
• Depending on the device version:
– Operating Instructions and the Description of Device Funct.
– Approvals and safety certificates
– Special safety instructions in accordance with the approvals
for the device (e.g. explosion protection, pressure
equipment directive etc.)
– Additional device-specific information

Endress+Hauser Proline Promag 10 Specifications

General

Device Type	Electromagnetic flowmeter
Measurement Principle	Electromagnetic
Lining	PTFE, PFA, rubber
Electrode Material	316L stainless steel, Hastelloy
Process Pressure	Up to 40 bar (depending on nominal diameter)
Output Signal	4 to 20 mA
Power Supply	24 V DC
Ingress Protection	IP67
Process Connection	Flange, clamp, threaded
Material	Stainless Steel