Endress+Hauser Proline Promag 10 - Wiring; Connecting Remote and Measuring Units

Proline Promag 10 Wiring
Endress+Hauser 35
3.1 Connecting the various housing types
Wire the unit using the terminal assignment diagram inside the cover.
3.1.1 Compact version
3.1.2 Remote version (transmitter)
3.1.3 Remote version (sensor)
A0010755
Transmitter connection:
1
2
3
4
Signal cable
Power supply cable
Electronics compartment cover (connection diagram on the
cover of the connection compartment)
Ground terminal for potential equalization
A0010757
Transmitter connection:
1
2
3
4
Signal cable
Power supply cable
Electronics compartment cover (connection diagram on the
cover of the connection compartment)
Ground terminal for potential equalization
Connecting the connecting cable ( ä 36):
5
6
7
Connection compartment cover (connection diagram on the
inside)
Coil current cable
Signal cable
A0008037
Transmitter connection:
1 Connection diagram inside the connection
compartment cover
Connecting cable connection:
5 Sensor/transmitter connecting cable
2
3
1
4
2
3
5
1
4
6
7
5
1