Endress+Hauser Proline Promag 53H - Page 56

Proline Promag 50H, 53H
56 Endress+Hauser
Coupling SMS 1145,
threaded adapter
1.4404 (F316L)
Sensor
DN
Fits to
piping
SMS
1145
DN
di G D L LK L
tot
1)
[mm] OD [mm] [mm] [mm] [mm] [mm] [mm] [mm]
A0005538
Order codes: 5*H**-5***********, DKH**-HK**
Surface roughness: R
a
 0.8 m
40 38.1 × 1.65 38.0 35.5 Rd 60 × 1/6" 92.0 63 71.0 262
50 50.8 × 1.65 51.0 48.5 Rd 70 × 1/6" 105.0 65 83.5 266
65 63.5 × 1.65 63.5 60.5 Rd 85 × 1/6" 121.0 70 100.0 276
80 76.2 × 1.65 76.0 72.6 Rd 98 × 1/6" 140.7 106 114.0 346
100 101.6 × 1.65 101.6 97.5 Rd 132 × 1/
6"
166.7 101 141.0 336
Order codes: 5*H**-5***********+CA/+CB, DKH**-HK**+CA/+CB
Surface roughness +CA: R
a
 0.8 m
Surface roughness +CB: R
a
 0.38 m
40 38.1 × 1.65 38.0 34.8 Rd 60 × 1/6" 99.7 61 71.0 256
50 50.8 × 1.65 51.0 47.5 Rd 70 × 1/6" 112.7 61 83.5 256
65 63.5 × 1.65 63.5 60.2 Rd 85 × 1/6" 127.7 66 100.0 266
80 76.2 × 1.65 76.0 72.6 Rd 98 × 1/6" 140.7 71 114.0 276
100 101.6 × 1.65 101.6 97.4 Rd 132 × 1/
6"
166.7 76 141.0 286
1) L
tot
= fitting length
If pigs are used for cleaning, it is essential to take the inside diameters of
measuring tube and process connection (di) into account!
D
LK
di
G
L