Proline Promag 50H, 53H
Endress+Hauser 63
Accessories
Various accessories, which can be ordered separately from Endress+Hauser, are available for the
transmitter and the sensor. The Endress+Hauser service organization can provide detailed information
on the order codes of your choice.
Device-specific accessories For the transmitter
For the sensor
Accessory Description
Promag 53 and Promag
50 transmitter
Transmitter for replacement or for stock. Use the order code to define the following
specifications:
–Approvals
– Degree of protection / version
– Cable type for the remote version
–Cable entries
– Display / power supply / operation
–Software
– Outputs / inputs
Software packages for
Promag 53
Software add-ons on F-CHIP, can be ordered individually:
– ECC electrode cleaning
–Batching
Input/output conversion
kit for Promag 53
Conversion kit with appropriate slot modules for converting the present input/output
configuration to a new version.
Mounting kit for
Promag 53 transmitter
Mounting kit for wall-mounted housing (remote version). Suitable for:
•Wall mounting
•Pipe mounting
•Panel mounting
Mounting set for aluminum housings.
Suitable for pipe mounting.
Cable for remote version Coil and electrode cables, various lengths. Reinforced cable on request.
Wall mounting kit Wall mounting kit for Promag H transmitter.
Accessory Description
Mounting kit Mounting kit for Promag H, comprising:
• 2 Process connections
•Screws
•Seals
Adapter connection for
Promag 53
Adapter connections for installing Promag 53 H instead of Promag 30/33 A or
Promag 30/33 H, DN 25.
Ground rings: If the process connections are made of PVC or PVDF, ground rings are necessary to
ensure that potential is matched. A set comprises 2 ground rings.
Set of seals For regular replacement of the seals of the Promag H sensor.
Welding jig Weld nipples as process connection:
Welding jig for installation in pipes.
Spacer A spacer is required if a sensor of DN 80 to 100 is replaced in an existing installation
and the new sensor is shorter.
To Next Page
Loading...
