Endress+Hauser Proline Promag 53H - Communication-Specific Accessories; Service-Specific Accessories

Proline Promag 50H, 53H
64 Endress+Hauser
Communication-specific
accessories
Service-specific accessories
Accessory Description
HART handheld
terminal Field Xpert SFX
100
Handheld terminal for remote configuration and for obtaining measured values via
the HART current output (4 to 20 mA).
Contact your Endress+Hauser representative for more information.
FOUNDATION
FIELDBUS
handheld terminal 375
Handheld terminal for remote configuration and for obtaining measured values via
FOUNDATION Fieldbus-H1.
Contact your Endress+Hauser representative for more information.
Fieldgate FXA320 Gateway for remote interrogation of HART sensors and actuators via web browser:
• 2-channel analog input (4 to 20 mA)
• 4 binary inputs with event counter function and frequency measurement
• Communication via modem, Ethernet or GSM
• Visualization via Internet/Intranet in the web browser and/or WAP cellular phone
• Limit value monitoring with alarm signaling by e-mail or SMS
• Synchronized time stamping of all measured values.
Fieldgate FXA520 Gateway for remote interrogation of HART sensors and actuators via web browser:
• Web server for remote monitoring of up to 30 measuring points
• Intrinsically safe version [EEx ia]IIC for applications in hazardous areas
• Communication via modem, Ethernet or GSM
• Visualization via Internet/Intranet in the web browser and/or WAP cellular phone
• Limit value monitoring with alarm signaling by e-mail or SMS
• Synchronized time stamping of all measured values
• Remote diagnostics and remote configuration of connected HART devices
FXA195 The Commubox FXA195 connects intrinsically safe smart transmitters using the
HART protocol to the USB port of a personal computer. This enables remote operation
of the transmitter with operating software (e.g. FieldCare). Power is supplied to the
Commubox via the USB port.
Accessory Description
Applicator Software for selecting and configuring flowmeters.
Applicator can be downloaded from the Internet or ordered on CD-ROM for installation
on a local PC.
Contact your Endress+Hauser representative for more information.
Fieldcheck Tester/simulator for testing flowmeters in the field.
When used in conjunction with the "FieldCare" software package, test results can be
imported into a database, printed and used for official certification.
Contact your Endress+Hauser representative for more information.
FieldCare FieldCare is Endress+Hauser’s FDT-based plant asset management tool. It can
configure all smart field units in your system and helps you manage them. By using the
status information, it is also a simple but effective way of checking their status and
condition.
FXA193 The FXA193 service interface connects the device to the PC for operation
via FieldCare.
Memograph M graphic
display recorder
The Memograph M graphic display recorder provides information on all the relevant
process variables: Measured values are recorded correctly, limit values are monitored
and measuring points analyzed. The data are stored in the 256 MB internal memory
and also on a SD card or USB stick.
The ReadWin
®
2000 PC software is part of the standard package and is used for
configuring, visualizing and archiving the data captured.