Application
• Accurate bidirectional measurement of liquids with a
minimum conductivity of ³ 20 mS/cm for chemical
applications.
• The electromagnetic measuring principle is unaffected
by pressure and temperature. Additionally the flow
profile has a minimal effect on the measurement
results.
Device properties
• Medium temperature: max. +150 °C (+302 °F)
• Nominal diameter: DN 15 to 200 (1/2 to 8")
• Application-specific liner (PFA, PTFE)
• Two-wire aluminium transmitter
• Graphical local display with operation from the outside
(Touch Control)
• Communication via 4-20 mA HART
• Ex approvals accepted worldwide: ATEX, IECEx
cCSAus (intrinsic safety or flameproof enclosure)
Your benefits
Genuine loop-powered technology for seamless 2-wire
integration and robustness in standard process
applications
Sizing - correct product selection
Applicator - the reliable, easy-to-use tool for selecting and
sizing measuring devices for every application
Installation - simple and efficient
• Compact design
• Suitable for installations in the hazardous area
• Reduced wiring effort due to two-wire technology
Commissioning - reliable and intuitive
Guided parameterization - "Make-it-run" wizards
Operation - increased measurement availability
• Measurement of volume flow
• No pressure loss, no moving parts, immune to
vibrations
• Diagnostics; Automatic data restore by HistoROM
Cost-effective Life Cycle Management by W@M
Technical Information
Proline Promag P 200
Electromagnetic flow measuring system
The device with genuine two-wire technology and for minimized
cost of ownership
TI01062D/06/EN/01.12
71185911
To Next Page
Need help?
General
