Endress+Hauser Proline Promag W 400 - Page 64

Proline Promag W 400
64 Endress+Hauser
Dimension C Dimension D
EN (DIN) ASME AS EN (DIN) ASME AS
DN PN 6 PN 10 PN 16 AWWA PN 6 PN 10 PN 16 AWWA
[in] [in] [in] [in] [in] [in] [in] [in] [in] [in] [in]
30 – – – 42.4 42.4 – – – 38.7 39.2
32 43.0 43.8 44.2 44.6 44.6 38.4 40.0 40.4 41.7 41.7
36 46.9 47.7 48.2 48.7 48.9 42.3 43.9 44.3 46.0 46.3
40 50.8 51.9 52.7 53.1 52.4 46.3 48.4 48.2 50.7 49.4
42 – – – 55.6 – – – – 53.0 –
48 59.9 60.8 61.7 62.0 61.5 55.3 57.3 49.4 59.5 58.7
54 – – – 69.6 – – – – 66.3 –
60 – – – 76.9 – – – – 73.0 –
66 – – – 82.4 – – – – 80.0 –
72 84.9 86.3 87.0 87.9 – 80.5 83.3 83.9 86.5 –
78 93.6 94.7 95.6 95.5 – 89.2 91.5 92.3 93.0 –
Order code for "Design", option A "Insertion length short" with DN 450 to 2000 (18 to 78") and order
code for "Sensor option", option CA…CE "Corrosion protection" with DN 350 to 2000 (14 to 78")
Option Description
CA IP66/67, Type 4X, fully welded; corrosion protection EN ISO 12944 C5-M
CB IP68, Type 6P, fact-potted; corrosion protection EN ISO 12944 C5-M
CC IP68, Type 6P, cust. potted; corrosion protection EN ISO 12944 C5-M
CD Buried IP68, Type 6P, fact-potted; corrosion protection EN ISO 12944 Im2/3
CE Buried IP68, Type 6P, cust. potted; corrosion protection EN ISO 12944 Im2/3
A
D
F
E
B
C
A0018158