Endress+Hauser Proline Promag W 400 - Installing the Wall-Mount Housing; Special Mounting Instructions

Proline Promag W 400
30 Endress+Hauser
Installing the wall-mount
housing
Wall mounting
149 (5.85)
210.5 (8.29)
=
5.8 (0.23)
mm (in)
17 (0.67) =
14 (0.55)
5.8 (0.23)
A0020523
Pipe mounting
ø 20…70
( 0.79…2.75)ø
~ ~ 4.0)102 (
4 x
SW 8
3 x
TX 25
A0020705
A separate mounting kit can be ordered from Endress+Hauser for pipe mounting (→  87).
Special mounting
instructions
Display protection
To ensure that the optional display protection can be easily opened, maintain the following
minimum head clearance: 350 mm (13.8 in)