Endress+Hauser Proline Promag W 400 - Operating Tool Access

Proline Promag W 400
Endress+Hauser 67
Dimension C Dimension D
EN (DIN) ASME AS EN (DIN) ASME AS
DN PN 6 PN 10 PN 16 AWWA PN 6 PN 10 PN 16 AWWA
[in] [in] [in] [in] [in] [in] [in] [in] [in] [in] [in]
30 – – – 42.4 42.7 – – – 38.7 39.2
32 43.0 43.8 44.0 44.7 44.7 38.4 40.0 40.4 41.7 41.7
36 47.0 47.8 48.0 48.8 48.9 42.3 43.9 44.3 46.0 46.3
40 50.9 52.0 52.5 53.1 52.5 46.3 48.4 48.2 50.7 49.4
42 – – – 55.7 – – – – 53.0 –
48 59.9 60.9 61.5 62.0 61.6 55.3 57.3 49.4 59.5 58.7
54 – – – 69.8 – – – – 66.3 –
60 – – – 77.1 – – – – 73.0 –
66 – – – 82.6 – – – – 80.0 –
72 85.1 86.5 86.8 88.1 – 80.5 83.3 83.9 86.5 –
78 93.8 95.0 95.4 95.7 – 89.2 91.5 92.3 93.0 –
Order code for "Sensor option", option CA…CE "Corrosion protection" with DN 350 to 2000 (14 to 78")
Option Description
CA IP66/67, Type 4X, fully welded; corrosion protection EN ISO 12944 C5-M
CB IP68, Type 6P, fact-potted; corrosion protection EN ISO 12944 C5-M
CC IP68, Type 6P, cust. potted; corrosion protection EN ISO 12944 C5-M
CD Buried IP68, Type 6P, fact-potted; corrosion protection EN ISO 12944 Im2/3
CE Buried IP68, Type 6P, cust. potted; corrosion protection EN ISO 12944 Im2/3
E
G
F
B
D
A
C
A0020435