Endress+Hauser Proline Promag W 800 - Vibration Resistance; Mechanical Load; Electromagnetic Compatibility (EMC); GSM;GPRS Signal Strength

Proline Promag W 800
26 Endress+Hauser
Vibration resistance Acceleration up to 2 g following IEC 600 68-2-6
Mechanical load Transmitter housing
• The transmitter housing must be protected against mechanical effects, such as shock, impact etc.
It is sometimes preferable to use the remote device version.
• The transmitter housing must never be used as a ladder or climbing aid!
Electromagnetic
compatibility (EMC)
In accordance with IEC/EN 61326
GSM/GPRS signal strength It is important to ensure that the signal of the mobile communications network is strong enough to enable the
system to dial into the GPRS/GSM network.
Process
Medium temperature range Sensor
The permissible temperature depends on the lining of the measuring tube.
• –20 to +50 °C (–4 to +122 °F) for polyurethane, DN 25 to 600 (1 to 24")
• 0 to +80 °C (+32 to +176 °F) for hard rubber, DN 50 to 600 (2 to 24")
Conductivity The minimum conductivity is 50 μS/cm.
Pressure-temperature ratings The following material load diagrams refer to the entire device and not just the process connection.
Flange connection according to EN 1092-1 (DIN 2501)
A0005594
PN 6/10/16/25/40, materials C22, FE 410W B and S235JRG2, DN 25 to 600 (1 to 24")
PN 25
PN 16
PN 10
PN 6
PN 40
0
5
10
15
20
25
35
30
40
[bar][psi]
-60
-40
-20
020
40 60 80 100 120 140 160 180 [°C]
360 [°F]
0-40 100 200 300
200
100
400
300
500
600
0