Proline Promag W 800
50 Endress+Hauser
1.4435/316L, Alloy C-22
Fitted electrodes • 2 measuring electrodes for signal detection
• 1 reference electrode for potential equalization
• 1 EPD electrode for the detection of empty pipes (not supported by the measuring device)
Process connections Flange connections:
• EN 1092-1 (DIN 2501)
–DN 300 = form A
–DN 350 = flat face
– DN 65 PN 16 and DN 600 PN 16 only as per EN 1092-1
•ASME
• JIS
•AS
Surface roughness Electrodes: 0.3 to 0.5 μm (12 to 20 μin). The data relate to parts in contact with fluid.
GSM/GPRS antenna • Omnidirectional dipole antenna with 3 m (9.84 ft) connecting cable.
• Connection socket for GSM antenna: SMA socket (female)
• For mounting and connecting the GSM antenna, see ä 26.
Operability
Operating concept Operating options
A0016602
Overview of operating options
1 Local operation of the measuring device
2Computer with Config 5800 operating tool
3 FXA 291 service interface (connected to computer via USB port and to measuring device via service interface)
4 Cell phone (wireless via SMS)
5 Computer (wireless via mail)
Onsite operation Display elements
• Liquid crystal display: unlit, 8-line, 16 characters per line
• Custom configurations for presenting different measured-value and status variables
• Totalizer
Operating elements
• Local operation via plastic-coated keypad
• Quick Start menu for quick commissioning
To Next Page
Loading...
