Proline Promag W 800
54 Endress+Hauser
Sevice-specific accessories
Documentation
The document types listed are available:
• On the CD-ROM supplied with the device
• In the Download Area of the Endress+Hauser Internet site: www.endress.com Download
Standard documentation
Supplementary device-
dependent documentation
Registered trademarks
Applicator
®
Registered or registration-pending trademarks of companies in the Endress+Hauser Group.
Accessories Description
Applicator Software for selecting and sizing Endress+Hauser measuring devices:
• Calculation of all the necessary data for identifying the optimum flowmeter:
e.g. nominal diameter, pressure loss, accuracy or process connections.
• Graphic representation of the calculation results.
Administration, documentation and access to all project-related data and parameters over
the entire life cycle of a project.
Applicator is available:
• Via the Internet: https://wapps.endress.com/applicator
• On CD-ROM for local PC installation.
W@M Life cycle management for your plant
W@M supports you with a wide range of software applications over the entire process:
from planning and procurement, to the installation, commissioning and operation of the
measuring devices. All the relevant device information, such as the device status, spare
parts and device-specific documentation, is available for every device over the entire life
cycle.
The application already contains the data of your Endress+Hauser device. Endress+Hauser
also takes care of maintaining and updating the data records.
W@M is available:
• Via the Internet: www.endress.com/lifecyclemanagement
• On CD-ROM for local PC installation.
Device type Communication Document type Documentation code
5W8B**- GSM/GPRS Brief Operating
Instructions
KA00056D
Operating Instructions BA00148D
Device type Document type Approval Documentation code
Installation Instructions – Specified for each
individual accessory
To Next Page
Loading...
