Endress+Hauser Proline Promag W 800 - Material

Proline Promag W 800
Endress+Hauser 49
Material Transmitter housing
• Compact housing: polycarbonate plastic
• Wall-mount housing: polycarbonate plastic
Sensor housing
• DN 25 to 300 (1 to 12"): aluminum coated AlSi10Mg
• DN 350 to 600 (14 to 24"): carbon steel with protective varnish
• Optional DN 50 to 300: fully welded with protective varnish
Sensor connection housing, remote version
• IP66/67: aluminum coated AlSi10Mg
• IP68: polycarbonate plastic, DN 50 to 300 (2 to 12")
• Order code for "Sensor option", option CA to CE "Corrosion protection" with polycarbonate plastic,
DN 350 to 600 (14 to 24")
Measuring tubes
•DN  300: stainless steel 1.4301 or 1.4306/304L
(for flanges made of carbon steel with Al/Zn protective coating)
•DN  350: stainless steel 202, 1.4301 or 1.4306/304L
(for flanges made of carbon steel with protective varnish)
Measuring tube lining
• DN 25 to 600 (1 to 24"): polyurethane
• DN 50 to 600 (2 to 24"): hard rubber
Electrodes
1.4435/304L, Alloy C-22
Process connections
EN 1092-1 (DIN 2501)
1.4571/316L, RSt37-2 (S235JRG2), C22, FE 410 WB
•DN  300: with Al/Zn protective coating
•DN  350: with protective varnish
JIS
RSt37-2 (S235JRG2), HII, 1.0425/316L
ASME B16.5
A105, F316L
•DN  300: with Al/Zn protective coating
•DN  350: with protective varnish
AS 2129
• DN 150, 200, 250, 300, 600: A105, RSt37-2 (S235JRG2)
• DN 80, 100, 350, 400, 500: A105, St44-2 (S275JR)
AS 4087
A105, St44-2 (S275JR)
Seals
In accordance with DIN EN 1514-1
Accessories
• Display protection
Stainless steel 1.4301
• Ground disks