Endress+Hauser Proline Promag W 800 - Page 36

Proline Promag W 800
36 Endress+Hauser
Remote version sensor, DN 25 to 300 (1 to 12")
A0012462
Dimensions in SI units
Dimensions in US units
DN
1)
L
2)
A B C D E F G H J
[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
25 200
129 163 143 102
286 202 84 120 94
32 200 286 202 84 120 94
40 200 286 202 84 120 94
50 200 286 202 84 120 94
65 200 336 227 109 180 94
80 200 336 227 109 180 94
100 250 336 227 109 180 94
125 250 417 267 150 260 140
150 300 417 267 150 260 140
200 350 472 292 180 324 156
250 450 522 317 205 400 156
300 500 572 342 230 460 166
1)
EN (DIN), AS, JIS: For flanges according to AS, only nominal diameters DN 80, 100 and 150 to 300 are available.
2)
The length is independent of the selected pressure rating. Length in accordance with DVGW/ISO.
DN
1)
L
2)
A B C D E F G H J
[in] [in] [in] [in] [in] [in] [in] [in] [in] [in] [in]
1" 7.87
5.08 6.42 5.63 4.02
11.37.953.324.723.70
1½" 7.87 11.37.953.324.723.70
2" 7.87 11.3 7.95 3.32 4.72 3.70
3" 7.87 13.2 8.94 4.30 7.10 3.70
4" 9.84 13.2 8.94 4.30 7.10 3.70
6" 11.8 16.4 10.5 5.91 10.2 5.51
8" 13.8 18.6 11.5 7.10 12.8 6.14
10" 17.7 20.6 12.5 8.08 15.8 6.14
12" 19.7 22.5 13.5 9.06 18.1 6.54
1)
ASME
2)
The length is independent of the selected pressure rating. Length in accordance with DVGW/ISO.
J
L
E
G F
H
B
C
A
D