Endress+Hauser Proline Promag W 800 - Page 39

Proline Promag W 800
Endress+Hauser 39
Remote version sensor, DN 350 to 600 (14 to 24")
A0003220
Dimensions in SI units
Dimensions in US units
DN
1)
L
2)
A B C D E F G H J
[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
350 550
129 163 143 102
683.5 401.5 282.0 564 276
375 600 735.5 427.5 308.0 616 276
400 600 735.5 427.5 308.0 616 276
450 650 785.5 452.5 333.0 666 292
500 650 836.5 478.0 358.5 717 292
600 780 940.5 530.0 410.5 821 402
1)
EN (DIN), AS: For flanges according to AS, only nominal diameters DN 350, 400, 500 and 600 are available.
2)
The length is independent of the selected pressure rating. Length in accordance with DVGW/ISO.
DN
1)
L
2)
A B C D E F G H J
[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
14" 21.6
5.08 6.42 5.63 4.02
29.1 15.8 11.1 22.2 10.9
15" 23.6 31.1 16.8 12.1 24.2 10.9
16" 23.6 31.1 16.8 12.1 24.2 10.9
18" 25.6 33.1 17.8 13.1 26.2 11.5
20" 25.6 35.1 18.8 14.1 28.2 11.5
24" 30.7 39.1 20.9 16.2 32.3 15.8
1)
ASME
2)
The length is independent of the selected pressure rating. Length in accordance with DVGW/ISO.
H
E
G
F
L
J
A
B
C
D