Endress+Hauser Proline Promag W 800 - Page 5

Proline Promag W 800
Endress+Hauser 5
Device design
A0016254
Primary components of the measuring device
1 Cover for transmitter housing
2 Display and operating module
3 Cover for battery compartment
4 GSM antenna (optional: only supplied with delivery if the "GSM/GPRS" option is ordered)
5 Batteries (number depends on the order, battery concept
 ä 8)
6 Bracket for electronics board incl. battery compartment
7Transmitter housing
8Sensor
Promag W (DN 300)
A0017041
Nominal diameters: DN 350 to 600 (14 to 24")
Materials:
• Sensor: carbon steel with protective varnish
• Measuring tube: stainless steel 1.4301/304, 1.4306/304L
• Liner: polyurethane, hard rubber
• Electrodes: 1.4435, Alloy C-22
• Connection housing, remote version: aluminum coated AlSi10Mg
1
2
3
4
5
6
7
8