Endress+Hauser Proline Promass 80 - Maintenance

16 Group SENSOR DATA Device Functions Proline Promass 80
58 Endress+Hauser
DENSITY COEFFICIENT
C0
This function shows the actual density coefficient C 0.
" Caution!
A density adjustment can alter the calibration value of this coefficient.
DENSITY COEFFICIENT
C1
This function shows the actual density coefficient C 1.
" Caution!
A density adjustment can alter the calibration value of this coefficient.
DENSITY COEFFICIENT
C2
This function shows the actual density coefficient C 2.
" Caution!
A density adjustment can alter the calibration value of this coefficient.
DENSITY COEFFICIENT
C3
This function shows the actual density coefficient C 3.
" Caution!
A density adjustment can alter the calibration value of this coefficient.
DENSITY COEFFICIENT
C4
This function shows the actual density coefficient C 4.
" Caution!
A density adjustment can alter the calibration value of this coefficient.
DENSITY COEFFICIENT
C5
This function shows the actual density coefficient C 5.
" Caution!
A density adjustment can alter the calibration value of this coefficient.
MINIMUM FLUID
TEMPERATURE
Display of the lowest fluid temperature measured.
MAXIMUM FLUID
TEMPERATURE
Display of the highest fluid temperature measured.
MINIMUM CARRIER
TUBE TEMPERATURE
! Note!
This function is not available for the Promass 80 E measuring device.
The lowest carrier tube temperature measured appears on the display.
MAXIMUM CARRIER
TUBE TEMPERATURE
! Note!
This function is not available for the Promass 80 E measuring device.
The highest carrier tube temperature measured appears on the display.
Function description SENSOR DATA