Endress+Hauser Proline Promass I 100 - Product Identification

Incoming acceptance and product identification Proline Promass I 100 Modbus RS485
12 Endress+Hauser
If one of the conditions is not satisfied, contact your Endress+Hauser Sales Center.
4.2 Product identification
The following options are available for identification of the measuring device:
• Nameplate specifications
• Order code with breakdown of the device features on the delivery note
• Enter serial numbers from nameplates in W@M Device Viewer
(
www.endress.com/deviceviewer): All information about the measuring device is
displayed.
For an overview of the scope of the Technical Documentation provided, refer to the
following:
• The "Additional standard documentation on the device" (  7) and "Supplementary
device-dependent documentation" (  7) sections
• The W@M Device Viewer: Enter the serial number from the nameplate
(www.endress.com/deviceviewer)
4.2.1 Transmitter nameplate
i
1
2
3
4
5
6
7
8
9
101112
Order code:
Ext. ord. cd.:
Ser. no.:
13
A0017520
 2 Example of a transmitter nameplate
1 Manufacturing location
2 Name of the transmitter
3 Order code
4 Serial number
5 Extended order code
6 Electrical connection data, e.g. available inputs and outputs, supply voltage
7 Permitted ambient temperature range (T
a
)
8 Degree of protection
9 2-D matrix code
10 Document number of safety-related supplementary documentation (→  93)
11 Manufacturing date: year-month
12 CE mark, C-Tick
13 Firmware version (FW)