Endress+Hauser Proline Promass I 100 - 16.14 Accessories; 16.15 Documentation

Proline Promass I 100 Modbus RS485 Technical data
Endress+Hauser 93
Viscosity
Package Description
Viscosity measurement In-line and real-time viscosity measurement
Promass I with the "Viscosity" application package also measures the real-time
viscosity of the fluid directly in the process, in addition to measuring the mass
flow/volume flow/ temperature and density.
The following viscosity measurements are performed on liquids:
• Dynamic viscosity
• Kinematic viscosity
• Temperature-compensated viscosity (kinematic and dynamic) in relation to the
reference temperature
Viscosity measurement can be used for Newtonian and non-Newtonian
applications and supplies accurate measured data irrespective of the flow, even
under difficult conditions.
16.14 Accessories
Overview of accessories available for order (  74)
16.15 Documentation
The following document types are available:
• On the CD-ROM supplied with the device
• In the Download Area of the Endress+Hauser Internet site: www.endress.com 
Download
Standard documentation
Communication Document type Documentation code
- - - - Brief Operating Instructions KA01117D
- - - - Technical Information TI01035D
Supplementary device-
dependent documentation
Document type Contents Documentation code
Safety Instructions ATEX/IECEx Ex i XA00159D
ATEX/IECEx Ex nA XA01029D
cCSAus IS XA00160D
Special documentation Information on the Pressure Equipment
Directive
SD00142D
Special documentation Modbus RS485 Register Information SD00154D
Special documentation Concentration Measurement SD01152D
Special documentation Viscosity Measurement SD01151D
Special documentation Heartbeat Technology SD01153D
Installation Instructions Specified for each individual accessory
(  74)
Overview of accessories available
for order (  74)