Endress+Hauser Proline Promass I 100 - Page 44

Commissioning Proline Promass I 100 Modbus RS485
44 Endress+Hauser
Temperature unit
Pressure unit
Parameter overview with brief description
Parameter Description Selection/
User entry
Factory setting
Mass flow unit Select the unit for mass flow.
Result
The selected unit applies for:
– Output
– Low flow cut off
– Simulation process variable
Unit choose list Country-dependent:
• kg/h
• lb/min
Mass unit Select the unit for mass.
Result
The selected unit is taken from:
Mass flow unit
Unit choose list Country-dependent:
• kg
• lb
Volume flow unit Select the unit for volume flow.
Result
The selected unit applies for:
– Output
– Low flow cut off
– Simulation process variable
Unit choose list Country-dependent:
• l/h
• gal/min (us)
Volume Select the unit for volume.
Result
The selected unit is taken from:
Volume flow unit
Country-dependent
• l
• gal (us)
Corrected volume flow
unit
Select the unit for corrected volume flow.
Result
The selected unit applies for:
– Output
– Low flow cut off
– Simulation process variable
Unit choose list Country-dependent:
• Nl/h
• Scf/min
Corrected volume unit Select the unit for standard volume.
Result
The selected unit is taken from:
Corrected volume flow unit
Unit choose list Country-dependent:
• Nl
• Scf
Density unit Select the unit for density.
Result
The selected unit applies for:
– Output
– Low value partial filled pipe detection
– High value partial filled pipe detection
– Simulation process variable
– Density adjustment (in the Expert menu)
Unit choose list Country-dependent
• kg/l
• lb/cf
Reference density unit Select the unit for reference density.
Result
The selected unit applies for:
– Output
– Low value partial filled pipe detection
– High value partial filled pipe detection
– Simulation process variable
– Fixed reference density
– Density adjustment (in the Expert menu)
Unit choose list Country-dependent:
• kg/Nl
• lb/Scf