ENERGREEN RoboMAX - Fluids, Greases, Coolant, and Fuel

72
© 2017 Energreen Srl
Professional machinery
9.4.2 - COOLANT
TOTAL GLACELF AUTO SUPRA is used as coolant in the RoboMAX.
• Diluted GLACELF AUTO SUPRA in demineralised water becomes a permanent coolant that
can be used all year round.
• To ensure a perfect mix it is essential to mix the antifreeze liquid with the dilution water
mechanically.
• Protection from ice depends on the proportion of GLACELF AUTO SUPRA diluted in the water.
GLACELF AUTO SUPRA; 33 40 50 68
Temperature reached for the
appearance of the rst crystals, C°.
-20 -26 -37 -69
• A volume of 33% of GLACELF AUTO SUPRA is to be recommended in the nal mixture.
• The maximum protection against ice is achieved at 68%.
• Do not use in concentrations higher than 70%.
GLACELF AUTO SUPRA corresponds with the main international antifreeze specications
(AFNOR NFR 15-601, ASTM D 3306, ASTM D 4656, ASTM D 4985, BS 6580).
9.4.3 - FUEL
• We recommend the use of fuels compliant with standards EN 590:96 or ASTM D975. Other
fuels with different specications can damage the engine or reduce its power. For further
details and/or explanations, consult the annexed engine manual.
• When refuelling, check that there is no water on the lid of the fuel drum and do not suck up
condensed water from the bottom.
• After running out of fuel, or after changing the fuel lter, bleed the air from the fuel lines.
DANGER:
When handling fuel or coolant, do not smoke or work near heat sources or sparks. Store
ammable uids away from areas with risk of re. Do not incinerate or burn containers the
machine is free from dirt, grease or inammable residuals.