76
© 2017 Energreen Srl
Professional machinery
9.5.4 - COOLANT LEVEL CHANGE
DANGER:
• The violent expulsion of coolant under pressure can cause serious burns.
• Turn off the engine.
• Remove the fuel ller cap only when it has cooled down enough to be touched
with the bare hand. Before removing the cap, slowly loosen it until the rst stop to
relieve the pressure.
Coolant
Changing frequency
Hours Years
Total Glacelf Auto Supra 2000 2
Other coolants 2000 2
Changing the coolant
To replace the coolant, follow the steps below:
• Position the machine on a at surface and switch
off the engine.
• Loosen the radiator cap (A) slowly in order to
discharge any residual pressure.
A
• Unscrew the two screws (C) at the sides and lift the
radiator grille guard (B).
• Fasten the guard in position using the pin (D).
D
B
C
To Next Page
Loading...