Entes MPR-45S - Pulse Output Settings

51
5.2.11. Pulse Output Settings
5.2.11.1. Pulse Output According to Active Energy
When Pulse Output is selected, the device can create pulses for import or export active energy ac-
cording to the increments listed below.
Import or export energy can be selected as the source.
• 1 Wh • 10 kWh
• 10 Wh • 100 kWh
• 100 Wh • 1 MWh.
• 1 kWh
5.2.11.2. Pulse Output According to Reactive Energy
When Pulse Output is selected, the device can create pulses for import or export reactive energy
according to the increments listed below.
Reactive energy values from Q1, Q2, Q3 and Q4 quadrants can be used as source.
5. 1 VArh 8. 1 kVArh 11. 1 MVArh
6. 10 VArh 9. 10 kVArh
7. 100 VArh 10. 100 kVArh