38
5.2.3.4. DST Mode Setting
1. Press the SET button while Clock DST Mode screen is displayed.
2. Daylight Save screen is displayed.
3. Press the SET button and select one of EUROPE, USA, MANUEL and DISABLE options.
4. If you select MANUEL option; you will have to enter month, week, day and hour for the start of
DST in that order.
5. After nishing the DST Start settings; you will have to enter month, week, day and hour for the
end of DST in that order.
6. After selecting your DST setting, press the SET menu and exit from this menu.
7. When exiting from the menu with the BACK or ESC button, don’t forget to save the changes.
5.2.4. RS-485 Communication Settings
5.2.4.1. RS-485 Address Setting
1. Select Address option from the Settings/RS-485 and press SET button.
2. Current address option will start blinking. You can browse between digits with SET and BACK
buttons. Select an address between 1 and 247 and press SET button.
3. When exiting from the menu with the BACK or ESC button, don’t forget to save the changes.
To Next Page
Loading...
