61
5.2.16. System Settings
5.2.16.1. PIN Code Activation
Whether or not a password is required to enter the settings menu is provided by the settings made in
this section.
1. Press the SET button on the Pin Act screen in the system menu.
2. When you press the SET button while “Pin Acivate” is displayed, you will have to enter the 4
digit factory default pin.
3. Select the default pin digits with UP/DOWN buttons and conrm the digit with SET button.
4. After entering the correct default pin, you can change Disable option to Enable. Press the
SET button after selecting Enable.
5. Factory default setting PIN is 1234.
5.2.16.2. Changing the PIN Code
1. Press the SET button on the Pin Chng screen in the system menu.
2. While “PIN CHAnGE” is displayed, press the SET button.
3. Enter the old PIN digit by digit with UP/DOWN buttons.
4. If you enter the old pin incorrectly, “ERROR” will be displayed.
5. If “ERROR” is displayed, press the SET button and enter the pin again correctly.
6. If you enter the old pin correctly, “PIN CHnGnE” will be displayed.
7. Enter your new 4 digit PIN and press the SET button.
8. Enter your new 4 digit pin again and press the SET button.
9. After entering the new pin correctly twice, “PIN CHAnGE CHANGED” will be displayed.
10. You can use your new PIN next time you enter the Setup Menu.
To Next Page
Loading...
