30
5.2 Setup Screen
Accesing the Programming Menu
When the SET button of the device is pressed for 3 seconds with PIN feature activated, entry screen
is displayed. When the password is entered correctly, programming menu is reached.
If PIN feature is not activated, programming menu is reached directly. Password for the device is
1234 as factory default.
5.2.1 Device Installation Settings
In order for the device to become operational, information of current and voltage transformers on the
system and the connection type must be entered to the device. When the device is energized for the
rst time, it will require the user to enter this information. Adjust the following settings accordingly by
using SET and UP/DOWN buttons.
5.2.1.1 Language Setting
Messages on the device screen can be viewed in four languages:
1.Turkish
2.English
3.German
4.French
Note: Please contact your Sales Representative for models in Scandinavian languages (Norwegian,
Finnish, Swedish) that can be requested optionally.
After selecting your language with UP/DOWN buttons, Press the SET button and go to the next step.
To Next Page
Loading...
