eove EO-150 - Page 70

70
VT
(ml)
300
-
2
500
30
-
600
None
IPAP Min
(mb)
6
-
49
6
-
49
IPAP Max
≥
IPAP Min
+ 5
IPAP Min ≥ EPAP + 2
IPAP Max
(mb)
7
-
50
7
-
50
IPAP Max
≥
IPAP Min
EPAP
(mb)
4
-
25
4
-
20
IPAP Min
≥
EPAP
+ 2
Pres. Ramp
1
-
5 (100
-
500ms)
1
-
5(5
-
250ms)
None
Rate
(c/min)
5
-
60
5
-
80
Rate
≤ 30 /
I Time min
(I/E
≤
1/1)
I Time Min ≤ I Time Max
I Trig.
AUTO / 1
-
5
AUTO / 1
-
5
None
E Trig.
(%)
AUTO / 10
-
90
AUTO / 10
-
90
None
Backup I Time
(s)
AUTO / 0.3
-
2.5
AUTO /
0.3
-
2.5
Rate
≤
30 /
Backup I Time
(I/E
≤
1/1)
Target Speed
1
-
3
1
-
3
None
I Time Min
(s)
0.3
-
2.5
0.3
-
2.5
Rate
≤ 30 /
I Time min
(I/E
≤
1/1)
I Time Min ≤ I Time Max
I Time Max
(s)
0.3
-
2.5
0.3
-
2.5
I Time Min
≤
I Time Max
C-FLOW: Continuous Flow (Leak)
This mode delivers continuous flow to the patient. The set flow (Flow) is delivered continuously
through the humidifier and nasal cannula. If the maximum pressure (Press. Max) is reached, the
device will still deliver flow but within the limit of this pressure.
Settings
Adult
Pediatric
Limitations
Flow
(l/min)
10
-
60
2
-
25
None
Press. Max
(mb)
7
-
50
7
-
50
None
WARNING

The C
-
Flow mode cannot be considered as a ventilation mode since it is not providing
pressure and flow directly to the patient.
No disconnection alarm will trigger if the patient interface is disconnected from the patient.