eove EO-150 - Technical and Environmental Specifications

64
Chapter 6 - Device information
Technical specifications
WARNING

Due to their resistance to flow, accessories such as filters, water traps and humidifiers
many decrease patient pressure during inspiration and increase patient pressure during
exhalation.
Physical Specifications
Docking Specifications:
Weight: 1.
5
kg
Size: 25x21x13 cm
Ventilation Module Specifications
Weight: 1.8 kg
Size: 24.5x14.5x10 cm
Ventilation
S
ound
P
ressure
weighted A
(tested according to ISO80601-2-72)
45 dB +/- 10% (in 3 standard configurations)
Ventilation Specifications
The EO-150 can be used in the following ventilation modes:
 (A)VCV : Volume Assisted Controlled Ventilation (with expiration valve)
 (A)PCV : Pressure assisted/Controlled Ventilation (with expiration valve)
 PSV : Pressure support Ventilation (with expiration valve)
 MPV : Mouth Piece Volume Ventilation
 MPP : Mouth Piece Pressure Ventilation
 PSV VT : Pressure support ventilation Volume regulated (with expiratory valve)
 V-SIMV : Volume Synchroneous intermittent Mandatory Ventilation (with expiratory
Valve)
 P-SIMV : Pressure Synchroneous intermittent Mandatory Ventilation (with expiratory
valve)
 CPAP : Continuous Positive Airway Pressure (with leak)
 ST : Synchronised Timed (with leak)
 PAC : Pressure Assisted/ Controlled (with leak)
 VTS : Volume Target Synchronised (with leak)
 C-FLOW : Continuous Flow