eove EO-150 - Power Specifications; Environmental Specifications

74
Power specifications
WARNING

This device is intended to function with external power supply 2440 from Mascot, never
use any other power supply unless recommended by Eove.

To disconnect the device from the mains, unplug power supply.
AC Inlet Voltage
100
-
240V
AC Inlet Power
1.6 A max
AC Inlet Power
50
-
60 Hz
DC inlet voltage
Max current
12 to 30 V
2.5 to 5.8 A
Power
105 W maximum (peaks)
70 W nominal
Module Embedded battery life
5 hrs
Internal battery (not replaceable by user) :
capacity
voltage
discharge current
Lithium
-
ion
2,8 Ah
21,6 V nominal
7 A max.
Interface/touchscreen start up time
< 50
s
Ventilator unit start up time
5 seconds
Environmental Specifications
Storage and transport conditions:
Ambient temperature
From
-
20°C à +60°C.
Relative humidity
From 10% à 95%, (non
-
condensing)
Operating conditions:
Ambient temperature
From +5°C to +40°C (after conditioning at 23° for 20
minutes)
Relative humidity
From 10% à 95%, (non
-
condensing).
Atmospheric pressure
From 660 hPa à 1100 hPa. (by default EO150
compensates for atmospheric pressure variations
e.g. related to altitude up to 3000 m).
O2 pressure source
O2 pressure source: up to
50
K
pa
with fl
ow up to
20 l/min and flexible tubing used. (from hospital O2
network, always use a flow or pressure limiter)
Bluetooth maximum distance
4 to 8 m