Section 7: Using the Epilog Dashboard
107
Once the values have
been defined on the left
side of the tab, you will
want to change them by
pressing the Modify
button.
After pressing the Modify
button, the selected color
values will be changed
and displayed on the right
side of the tab.
The other buttons in the
middle of the tab are
defined here:
Add a custom color.
Scroll buttons. These buttons
move the selected color up or
down in the table. This is
important because Color
Mapping always starts at the
top color and works its way
down. This is explained in
more detail on the next pages.
Modify button.
Delete a color.
To Next Page
Loading...