Section 7: Using the Epilog Dashboard
109
Once your vector outlines are set up in your artwork, Select File/Print and go to
the Color Mapping tab in the Epilog Dashboard.
Make sure Color Mapping is checked so we can set up our color mapping scheme.
In our example we want to mark the green window frames first, so green must be
the first color at the top of the list. Normally the color green is the second color
down in the list. In order to move it we just select it and use the Up cursor arrow
to move it up one position.
Note – It’s important to know that the values do not move with the colors. You
must move the colors first, and then change the values.
We now have green at the top and red is the second color down. This is the order
that the colors will be processed. You do not need to delete the other colors
unless you want to. If there are no objects in your artwork that match the
remaining colors, they will be ignored.
To Next Page
Loading...