Appendix C Additional Dashboard Instructions
259
Select Use the following IP
address:
Type in the following IP
Address and Subnet mask:
192.168.3.3
255.255.255.0
Default gateway:
Leave blank
This number is not an error;
the last digit of the IP address
in this window must be
different than the IP address
set in your laser system.
Click the OK button in this window and then click on the Close button in the next
window.
That’s it! The IP Address in your computer is set. Your computer will be able to
talk to your laser after you install the print driver (which is the next step).
To Next Page
Loading...