Epson AcuLaser C2900N - Page 164

1 - 151
Chapter 1 Troubleshooting
Epson AcuLaser C2900N
Revision B
Confidential
9
Checking after replacing the DRUM CARTRIDGE.
Replace the DRUM CARTRIDGE. (Refer to RRP4.6.)
Is the image printed correctly?
End of work.
Warning: Start the
operation after the
fuser unit has
cooled down.
Replace the fuser
unit. (Refer to
RRP6.1.) After
replacement, be
sure to clear the
life counter value.
Step Check
Remedy
Yes No