1 - 5
Chapter 1 Troubleshooting
Epson AcuLaser C2900N
Revision B
Confidential
14) In the FIP, the sheet feeder immediately below the printer main body is called "Tray 1", and the
cassette below it is called "Tray 2".
15) Some of the instructions in the FIP are branched off depending on the specifications. Follow the
applicable instruction.
16) For some optional components, you may have to refer to the manual of the relevant component for
troubleshooting. Have the relevant manual at hand as needed.
To Next Page
Loading...
