Epson AcuLaser C2900N - Page 263

Chapter 3 Removal and Replacement Procedures Revision B
Epson AcuLaser C2900N 3 - 9 Confidential
RRP1.3 COVER REAR (PL1.1.3)
[Removal]
1) Remove the CASSETTE ASSY 250. (RRP2.1)
2) Open the COVER ASSY FRONT MG (PL1.2.1).
3) Open the TRANSFER ASSY (PL6.1.7).
Note: Cover the drum of the DRUM CARTRIDGE to avoid exposure to light.
4) Remove the DRUM CARTRIDGE. (RRP4.6)
Note: The FUSING part is very hot. Take added care not to get burned when performing the
service operation.
5) Remove the FUSER UNIT. (RRP6.1)
6) Remove the COVER CST. (RRP1.4)
7) Remove the COVER ASSY WINDOW TNR. (RRP1.6)
8) Remove the COVER SIDE R. (RRP1.5)
9) Remove the COVER SIDE L. (RRP1.7)
10) Remove the two screws (silver, tap,
8mm) that fix the COVER REAR (PL1.1.3)
to the printer.
11) Release the two tabs of the COVER
REAR from the holes of the COVER ASSY
TOP (PL1.1.1), remove the COVER REAR
from the printer.
10)
10)
11)