Epson AcuLaser C2900N - Page 266

Chapter 3 Removal and Replacement Procedures Revision B
Epson AcuLaser C2900N 3 - 12 Confidential
RRP1.5 COVER SIDE R (PL1.1.6)
[Removal]
1) Remove the CASSETTE ASSY 250. (RRP2.1)
2) Open the COVER ASSY FRONT MG (PL1.2.1).
3) Open the TRANSFER ASSY (PL6.1.7).
Note: Cover the drum of the DRUM CARTRIDGE to avoid exposure to light.
4) Remove the DRUM CARTRIDGE. (RRP4.6)
Note: The FUSING part is very hot. Take added care not to get burned when performing the
service operation.
5) Remove the FUSER UNIT. (RRP6.1)
6) Remove the COVER ASSY WINDOW TNR. (RRP1.6)
7) Remove the six screws (silver, tap,
8mm) that fix the COVER SIDE R
(PL1.1.6) to the printer.
8) Release the front hook of the COVER
SIDE R.
9) Lift the COVER SIDE R slightly and then
release the back hook of the COVER SIDE
R from the groove of the COVER ASSY
TOP (PL1.1.1). Then remove the COVER
SIDE R from the printer.
7)
7)
7)
7)
8)
9)-1
9)-2
7)
7)