Chapter 3 Removal and Replacement Procedures Revision B
Epson AcuLaser C2900N 3 - 25 Confidential
6) Secure the two hooks of the COVER
LINK FRONT to the LINK ASSY FRONT.
7) Route the HARN ASSY GND along the
GUIDE HARNESS AC, secure the
grounding terminal of the HARN ASSY
GND with the one screw (silver, 6mm).
Note: This step is only for optional
duplex.
8) Route the HARN ASSY DUP RELAY
and the HARNESS ASSY PNL A through
the hooks of the printer.
To Next Page
Loading...
