Epson AcuLaser C2900N - Page 291

Chapter 3 Removal and Replacement Procedures Revision B
Epson AcuLaser C2900N 3 - 37 Confidential
13) Release the two hooks of the COVER
DRAWER (PL1.2.15), remove the
COVER DRAWER from the HOLDER
ASSY FRONT R.
13.1
13.1
13.2
14) Release the harness of the HARN
ASSY DUP RELAY (PL1.2.13) from the
hooks of the HOLDER ASSY FRONT R.
15) Release the two hooks on the
connector (P272) of the HARN ASSY
DUP RELAY, pull out the harness and
connector (J271) through the hole on the
HOLDER ASSY FRONT R, and remove
the HARN ASSY DUP RELAY.
15.1
15.2