Chapter 3 Removal and Replacement Procedures Revision B
Epson AcuLaser C2900N 3 - 38 Confidential
[Replacement]
1) Pass the connector (P271) and the
harness of the HARN ASSY DUP RELAY
through the hole on the HOLDER ASSY
FRONT R, and secure the connector
(P272) of the HARN ASSY DUP RELAY to
the HOLDER ASSY FRONT R with the
two hooks.
2) Route the harness of the HARN ASSY
DUP RELAY along the hooks of the
HOLDER ASSY FRONT R.
3) Attach the COVER DRAWER to the
HOLDER ASSY FRONT R, secure the
COVER DRAWER with the two hooks.
To Next Page
Loading...
