Epson AcuLaser C2900N - Page 469

Chapter 3 Removal and Replacement Procedures Revision B
Epson AcuLaser C2900N 3 - 215 Confidential
6) Secure the COVER INLET to the printer
with the two screws (silver, tap, 12mm).
7) Mate the notch of the BRACKET SW
with the hook of the GUIDE HARNESS
AC.
8) Mate the holes of the BRACKET SW
with the two bosses of the printer, secure
the BRACKET SW with the two screws
(silver, tap, 8mm).