Epson AcuLaser CX16 - Page 104

Item Description
Clear button Resets all configuration settings to previous values.
E-mail
The Network - E-mail window allows you to configure the following items:
Item Description
SMTP If “Enable” is selected, sending E-mail is enabled.
Choices Enable, Disable
Default Enable
Configuration Menu Equivalent:
UTILITY - ADMIN. MANAGEMENT - E-MAIL SETTING - SMTP
Sender Name Specify the name of the E-mail sender when using network scanning.
Range Up to 20 characters
Default EPSON AL-CX16NF
Configuration Menu Equivalent:
UTILITY - ADMIN. MANAGEMENT - E-MAIL SETTING - SENDER NAME
E-mail Address Specify the E-mail address of the sender when using network scanning.
Range Up to 64 characters
Configuration Menu Equivalent:
UTILITY - ADMIN. MANAGEMENT - E-MAIL SETTING - E-MAIL ADDRESS
Note:
If the E-mail Address text box remains blank when the Apply button is clicked, an error
appears. Be sure to specify an appropriate setting.
Default Subject Specify the subject of the E-mail message when using network scanning.
Range Up to 20 chacacters
Default From EPSON AL-CX16NF
Configuration Menu Equivalent:
UTILITY - ADMIN. MANAGEMENT - E-MAIL SETTING - DEFAULT SUBJECT
AcuLaser CX16NF Reference Guide
Using Web-Based EpsonNet Config 104