Item Description
Tray Identifies the media feed units (Tray 1/2) installed on the machine. Tray 2 displays when
installed.
Paper Size Indicates the paper size loaded in a specific tray.
Media Type Indicates the media type loaded in a specific tray.
Status Indicates the media status (“Ready” or “Empty”) for each tray.
ROM Version
The System - Device Information - ROM Version window provides the following information.
Item Description
Main F/W Displays the main F/W version.
Engine F/W Displays the engine F/W ROM version.
Interface Information
The System - Device Information - Interface Information window provides the following
information.
Item Description
Type Identifies the type of network interface on the machine
(Ethernet 10Base-T/100Base-TX).
Ethernet Speed Identifies the transmission speed for the network and the transmission method for
bi-directional transmission.
IP Address Identifies the IP (Internet Protocol) address of the Ethernet interface.
Subnet Mask Identifies the subnet mask address of the Ethernet interface.
Gateway Address Identifies the gateway address of the Ethernet interface.
MAC Address Identifies the MAC (Media Access Control) address of the Ethernet interface.
Host Name Identifies the name of the machine.
Consumable
The System - Device Information - Consumable window provides the following information:
AcuLaser CX16NF Reference Guide
Using Web-Based EpsonNet Config 65
To Next Page
Loading...
Need help?
General
