Item Description
Clear button Resets all configuration settings for this window to their user defaults.
LDAP Search
The Scan - Speed Dial Setting - LDAP Search window allows you to configure the following items:
Item Description
LDAP Search Specify the method for searching for the destination.
Choices Name, E-mail
Default Name
LDAP Search String Specify the LDAP search string.
Range Up to 20 characters
Apply button Starts the LDAP searching.
Clear button Resets all configuration settings for this window to their user defaults.
Note:
When an LDAP server is used, the correct search results may not be retrieved when the search is
performed from a server using anonymous access.
Speed Dial Registration (Scan to Server)
On the Scan - Speed Dial Setting - Speed Dial Registration page, select the server type of speed
dial destination to be added.
Item Description
Speed Dial Registration From the drop-down list, select the type of speed dial destination to be added.
If “FTP” is selected, refer to “For FTP Server” on page 77.
If “SMB” is selected, refer to “For SMB server” on page 79.
Choices FTP, SMB
Default FTP
Apply button Displays the page for the type of speed dial destination selected from the list.
Clear button Resets all configuration settings for this window to their user defaults.
AcuLaser CX16NF Reference Guide
Using Web-Based EpsonNet Config 76
To Next Page
Loading...
Need help?
General
